Wenglor ODX402P0088, Руководство по эксплуатации

Страница: 18 / 23

18 Settings
6.5. Display
The display is set up with the help of the display menu.
Function Description
Rotate Rotating the Display
The display is rotated 180° by pressing the enter key. The display can
be returned to its original position by pressing the same key once again.
Intensity Adjusting Display Brightness
After pressing the
4
and
3
keys, the menu appears immediately with
the selected brightness setting (min., normal or max). In setting power
save the display turns off after 60 seconds. In setting screensaver, the
display inverts every 60 seconds. The brightness is set to normal during
these settings.
Selection is acknowledged by pressing the enter key.
Mode Select the Display Mode
By pressing the key
5
and
6
the display mode is selected and
confirmed by pressing the enter key. The selectable modes are:
• Sensors: Status of the Sensors (view “elements”) is displayed
• Outputs: Status of all 15 outputs is displayed
• Measurement: The current speed of the measurement function is dis-
played.
Display Definition Defining the Display
Zooming the bar graph: The bar graph is zoomed by
pressing the
5
and
6
keys.
Display elements:
The elements which will appear at the display can be selected with the
5
and
6
keys and acknowledged by pressing the enter key.
Displayable elements include:
• Signal Strength(numeric value 0 – 999)
• Threshold (numeric value 0 – 999)
• Bar graph
• Switching Status Indicator/contamination warning (output)
• Operating Mode
The elements can be displayed all together, individually or in any desired
combination.