10
Installation and Electrical Connection
5. Installation and Electrical Connection
5.1 Installation
• Protect the product from contamination during installation.
• Observe all applicable electrical and mechanical regulations, standards, and safety rules.
• Protect the product against mechanical influences.
• Make sure that the sensor is mounted in a mechanically secure fashion.
• The sensing face of the sensor may not contact any other machine parts.
• Installation instructions must be observed (see product detail page at www.wenglor.com)
• Specified torque values must be complied with (see product detail page at www.wenglor.com)
ATTENTION!
Risk of property damage in case of improper installation!
The product may be damaged.
• Comply with installation instructions.
CAUTION!
Risk of personal injury or property damage during installation!
Personal injury and damage to the product may occur.
• Ensure a safe installation environment.
5.2 Installation for Format 40×40 (I1QHxxx)
The sensing surface of the sensor can be mounted in 5 different directions.
