5
Set Up (continued)
5. Grasp the end of the top step at the "hand position" decals, and place your right foot on the riser leg decal.
6. Lift the riser toward you until you hear the
latch pin snap twice. When lifting, keep
your foot on the leg decal and lean back so
your body weight helps pull up the riser.
Important:
The rear legs must be straight
up and down, and the second lock
must be engaged, or the riser is not
fully latched.
7. To install a back rail, side rail or 4th-Step
unit, refer to the instructions on pages 8 to
10.
To avoid injury, grasp ends of
top step only at "hand position"
decals.
!
WARNING
Riser will fall if latch pin
is not properly engaged.
!
WARNING
