10
SETUP
CONTINUED
CD
/
RW PLAYBACK
The internal cables must be connected from the Mixer output to the CD/RW Recorder/Cassette Deck
LINE OUTPUT 2 RIGHT
and
LINE OUTPUT 2 LEFT
connectors.
1.
Load the Disc.
2.
Press the
PLAY
push button.
CD
/
RW RECORDING
The internal cables must be connected from the Mixer output to the CD/RW Recorder/Cassette Deck
LINE INPUT 1 RIGHT
and
LINE INPUT 1 LEFT
connectors.
1.
Load a recordable Disc.
2.
Press the
RECORD
push button. This places the Deck into the Record Ready mode (display shows
NOW OPC
).
3.
Adjust the signal volume (refer to page 24 of the Tascam CC-222 Owner’s Manual).
4.
Press the
PLAY
or
PAUSE
push button to start recording.
5.
Press the stop push button to stop recording. The
REC
indicator flashes as the unit writes to the
Disc.
Note:
While the message
PMA W
RITING
displays,
do not turn off power to the CD/RW-Cassette
.
TROUBLESHOOTING
Refer to each manufacturer’s owner manual in the binder for detailed troubleshooting information.
1.
Verify all cables are firmly connected.
2.
Verify power is supplied to all components. Are there visible lights on each component?
3.
Verify channels on the power amplifier are turned up. They should be set about three-quarters of the
way up (turned clockwise).
4.
Verify mixer settings are set so that volume sources are loud enough to hear an audible signal.
Audio System CD Upgrade Option
Qty
Tascam CC-222 CD/RW Recorder/Cassette Deck
1
Internal Cables, RCA/Phono connectors
2
Internal Cables, RCA/Phono to 1/4-inch connectors
2
Screw, 10-32x3/4"
4
REPLACEMENT PARTS
