Wenger Studio Makeup Station with Drawer Option, Руководство по установке, Страница: 5 / 8

5
4. Align the mounting holes of a Drawer Glide Slide Assembly to a set of Pilot Holes on the bottom
side of the Counter. Make sure that the Bracket Flange faces the Main Frame and that the
Glide opens outward.
! WARNING
Do not remove the
Counter to install
the Drawer. Serious
electrical shock or
death can result.
INSTALLATION
CONTINUED
INSTALL THE DRAWER
CONTINUED
Drawer Glide Slide Assembly
Counter
Bracket Flange
Main Frame
5. Using a phillips screwdriver,
attach each Drawer Glide
Slide Assembly to the
Counter with four Pan Head
Screws.
Pan Head Screw, 10x3/4-inch
Caution: Tighten the Pan Head Screws only enough to be snug. Over tightening can strip the
threads in the Counter
6. Attach the L-Bracket to the Counter by screwing two Flat Head Screws, #8x3/4-inch, into the two
Lock Bracket Pilot Holes. Make sure that the flange faces the outside edge of the Counter.
Note: The L-Bracket may need to be adjusted in or out to fully engage the lock.
Flat Head Screw, #8x3/4-inch
L-Bracket
Lock Bracket Pilot Hole
Note: The L-Bracket Flange faces
the outside edge of the
Counter
Drawer Glide Slide Assembly