Wenger 5-light 30" Studio Makeup Station, Руководство по установке

Страница: 8 / 16

8
INSTALLATION
CONTINUED
INSTALL THE FIRST MAKEUP STATION
1. Remove the four flange Nuts, 3/8-16, from the hardware bag.
2. Screw (clockwise) a flange Nut, 3/8-16, onto each each of the two Mounting Bracket Studs with the
flanges facing upward as shown below. Position the flange Nuts so that the flange of the nut is
one-half inch from the top edge of the Mounting Bracket.
1/2"
Mounting Bracket
flange Nut, 3/8-16
Mounting Bracket
flange Nut, 3/8-16
Mounting
Bracket Stud
Mounting Bracket
Stud
Note: When installing two or more Makeup Stations, always first install a 6-light or 5-light unit on the
left end. Add additional 6-light or 5-light units to the right and finish the row with a 9-light or 8-
light unit on the right end.
3. find the shipping container marked 6-light unit or 5-light unit .
a. With two people working together, place the shipping container onto a flat surface near the
installation wall.
b. Remove the cover and fold the sides down.
Flange facing upward and 1/2"
from the top of the Mounting
Bracket.
Cover
Shipping Container Sides
Counter Bottom Surface
6-light or 5-light Makeup Station
! WARNING
Two people are
always required to
lift or move the
Studio Makeup
Station Assembly.
The Counter and the Mirror Carton are
shipped under the Makeup Station.