Wenger 32-inch Partial End Closure Скачать руководство пользователя страница 3

3

The High Density Sports Storage System Partial End Closure Accessory is guaranteed free of defects in
materials and workmanship for three full years.

Our guarantee assures you of either a full refund or repair or replacement of the defective materials or
workmanship without charge, at the discretion of our Customer Service Department. Just call a
Customer Service Representative at  1-800-887-7145 and state the reason you are dissatisfied. If a
product return is necessary, your representative will issue a return authorization. This is your sole
remedy for breach of this warranty.

Should you have a question or problem with any Wenger product, don’t hesitate to call, even if the
product is past warranty. It’s important to us that all our customers be satisfied.

This is the sole warranty made by Wenger. Wenger disclaims all other warranties, including the
warranties of merchantability and fitness for a particular purpose, as well as all liability for incidental,
consequential, special, and indirect damage. Wenger liability for direct damages shall be limited to the
amount you paid for the product involved. Wenger reserves the right to make product changes without
obligation to incorporate such changes into products previously sold.

Some states do not allow the exclusion or limitation of damages or warranties, so the above may not
apply to you. This warranty gives you specific legal rights. You may also have other rights which vary
from state to state.

WARRANTY

IMPORTANT USER INFORMATION

INSTALLATION

The Wenger High Density Sports Storage System Partial End Closure Accessory installation must
comply with local building regulations and codes.

All personnel (including all temporary workers) installing the Wenger High Density Sports Storage
System Partial End Closure Accessory must read and understand this entire manual.

Personnel installing the Wenger High Density Sports Storage System Partial End Closure Accessory
must comply with the warnings and cautions in the Safety Section.

INTENDED USE

The Wenger High Density Sports Storage System Partial End Closure Accessory is intended for
indoor use in normal ambient temperature and humidity conditions — it must not be exposed to
prolonged outside weather conditions.

The Wenger High Density Sports Storage System Partial End Closure Accessory is intended to be
permanently installed only as described in this manual. 

Содержание 32-inch Partial End Closure











Отзывы: