Wenger 1-Column, Руководство пользователя

Страница: 7 / 12

7
Operation
Repositioning Drawers and Slide-Out Shelves
1. Drawers and Half Width Slide-Out Shelves can be repositioned at different heights
in 1/2” (1.27 cm) increments by relocating the Glides along the Rails.
a. Remove the Drawer or the Slide-Out Shelf and Stop Bracket from the Glides
by first pulling it outward, then tilting it up and lifting it out.
The Stop Bracket can either be on the top or bottom of the Slide-Out Shelf.
The Plastic Bumper does not need to be removed from the Slide-Out Shelf.
b. Remove either the top or bottom set of Screws and Clips attaching both Glides to the Rails.
c. Relocate the Glides at even elevations on each of the four Rails and reattach the
Screws and Clips to secure them into place.
d. Reinstall the Drawer or the Shelf and Stop Bracket.
Only 1-Column Slide-Out Shelf can be repositioned.
The 2-Column Slide-Out Shelf is shown below only to reference the Stop Bracket location.
Glide
Plastic
Bumper
Stop
Bracket
Screws
Only the top or bottom set
of Screws and Clips need
to be removed.