S
taCkING
M
ethoDS
1. When stacking Stage Boxes, always do one of the following:
a. If stacking side to side or side to top surface, use the Fasteners to hold the Stage Boxes
in place.
b. If stacking the top surface to the bottom surface, insert the upper Stage Box Rubber Feet
(on the bottom surface) into the Foot Pockets on the top surface of lower Stage Box
as shown below.
2. When stacking Stage Boxes, the bottom side of each Stage Box must be supported over the
box’s entire bottom surface area.
Never create a bridge by attaching the Fasteners and not supporting the Stage Box from
the bottom. The Fasteners will not support loading.
5
Foot
Pockets
Rubber
Foot
Rubber
Foot
Always insert the Rubber Feet on the upper
Stage Box into the Foot Pockets on the lower
Stage Box when stacking Stage Boxes bottom
surface to top surface.
Stage
Box
Stage
Box
The entire bottom surface
must be supported when
stacking Stage Boxes.
Never create a bridge by attaching the
Fasteners and not supporting the Stage Box
from the bottom.
These two Stage Boxes are
attached by the Fasteners
Small
Stage Box
Large
Stage Box
Fastener
Molded-in
Insert
When stacking a Stage Box side surface to another
Stage Box, attach the two together with the Fasteners.
1a
1b
s
tacking
s
tage
B
oxes
Never stand on Stage Boxes
that are stacked two or more
high.
!
caUtion
Stage Boxes must always be
supported at the bottom on
a full side.
!
caUtion
Never use the Stage Box
Fasteners to support loading.
Fasteners are intended only
to hold Stage Boxes in place.
!
caUtion
