Wen WB4723, Инструкция по эксплуатации

Страница: 12 / 16

ASSEMBLY & ADJUSTMENTS
Fig. 9
ATTACHING DRAWER PANELS
(10L, 10R, 11, 12, 13)
10. Lay one drawer bottom (Fig. 9
- 13) down on a flat surface. Attach
the right (Fig. 9 - 10R) and left (Fig. 9
- 10L) drawer panels to the inside of
the front (Fig. 9 - 11) and back (Fig.
9 - 12) drawer panels using M6x10
bolts, washers, and nuts.
INSTALLING DRAWERS
11. Install the drawers, making sure
the runners on the drawers are level
with the drawer mounts. Check the
drawers’ run (you may have to swap
the drawers around to get a proper
fit. Play with them to see which gives
the smoothest feel.)
ATTACHING BACK UPPER
POSTS (15R, 15L)
12. Attach the left and right back
upper posts (Fig. 10 - 15R, 15L)
to inside of the left and right back
posts (Fig. 10 - 2), at the left and
right side mounting holes (not the
back mounting holes), using M6x10
bolts, washers, and nuts. Make sure
that the middle holes on the back up-
per posts (Fig. 10 - 15R, 15L) face
the back of the unit (not the sides).
ATTACHING BACK SHELF
BEAM (16B)
13. Attach the back shelf beam
(Fig. 10 - 16B) to the inside of the
back upper posts, at the uppermost
mounting holes, using M6x10 bolts,
washers, and nuts.
NOTE: Make sure that all beams have flanges on the top when assembling.
LEFT & RIGHT SHELF BEAM (17L, 17R)
14. Attach the left shelf beam (Fig. 10 - 17L) and right shelf beam (Fig. 10 - 17R) to the back upper posts (Fig. 10 -
15R, 15L), using M6x10 bolts, washers, and nuts.
ATTACHING FRONT SHELF BEAM (16F)
15. Attach the front shelf beam (Fig. 10 - 16F) to the inside of the left and right shelf beams, using M6x10 bolts,
washers, and nuts.
12
14
A
13
10R
10L
12
11
15R 15L
2
16B
17L
16F 17R
2
15L
Fig. 10