Wen TC1318 Скачать руководство пользователя страница 3

Страница: 3 / 20

SPECIFICATIONS

Model Number

TC1318

Motor

120V, 60 Hz, 13.5A

Blade Speed

360 RPM

Working Width

18 Inches

Blade Diameter

8 Inches

Working Depth

8.7 Inches

Product Weight

24.0 Pounds

Product Dimensions

Folded: 50-1/2 in. x 18 in. x 15 in.
Unfolded: 39 in. x 18 in. x 40-1/2 in.

INTRODUCTION

Thanks for purchasing the WEN Electric Tiller. We know you are excited to put your tool to work, but first, please

take a moment to read through the manual. Safe operation of this tool requires that you read and understand this

operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety

concerns, as well as helpful assembly and operating instructions for your tool.

NOTE:

The following safety information is not meant to cover all possible conditions and situations that may occur.

WEN reserves the right to change this product and specifications at any time without prior notice.

At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,

please visit

wenproducts.com

for the most up-to-date manual or contact our customer service at

1-800-232-1195

Keep this manual available to all users during the entire life of the tool and review it frequently to maximize

safety for both yourself and others.

SAFETY ALERT SYMBOL:

Indicates danger, warning, or caution. The safety symbols and the explanations

with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the

risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not

substitutes for proper accident prevention measures.

Содержание TC1318





















Результаты поиска

Содержание TC1318

Отзывы:

Похожие инструкции для TC1318

Бренды по названию

Популярные бренды

Wen TC1318, Инструкция по эксплуатации

Результаты поиска

Содержание TC1318

Отзывы:

Похожие инструкции для TC1318

Бренды по названию

Популярные бренды