Wen RT6033, Инструкция по эксплуатации, Страница: 15 / 24

OPERATION
CUTTING ALONG A STRAIGHT EDGE
The straight guide fence is used to create straight cuts along a workpiece
with a straight edge that can be followed. To attach the straight cut fence:
1. Attach the two fence poles to the fence bracket and tighten the two
knobs.
2. Attach the straight guide fence to the router base by passing the poles
through the holes in the base (Fig. 16). Make sure that each pole passes
through both holes on the router base.
3. Adjust the position of the poles to the suitable distance and tighten the
poles with two knobs on the router base. CAUTION: Make sure that the
lock knobs are securely tightened.
4. Slide the fence along the straight reference edge of your workpiece,
moving the router along the edge in a straight line (Fig. 17).
5. The fence pole scale can be clamped onto one of the fence poles to
measure the distance between the bit and the edge of travel (Fig. 18).
CUTTING A CIRCULAR ARC
WHAT YOU NEED:
• Straight Guide Fence
• Two Fence Poles
• Fence Pole Scale (Optional)
• Workpiece with a straight edge
Fig. 16
Fig. 17
Fig. 18
Fig. 19
The centering pin can be used to cut out circular patterns when combined
with the fence pole. To attach the centering pin:
WHAT YOU NEED:
• One Fence Pole
• Centering Pin
• Fence Pole Scale (Optional)
1. Fit the centering pin onto the fence pole. Loosen the butterfly nut to adjust the height of the pin. Tighten the but-
terfly nut to secure the pin at the desired height.
2. Insert the pole through the two holes on the router base and tighten the lock knob. If needed, attach the fence
pole scale onto the pole to assist in measuring the distance.
3. Determine the center of the circular arc, and drill a hole for the tip of the centering pin.
4. Place the router on the workpiece with the centering pin placed in the hole. Determine the radius of the circular
arc by adjusting the position of the router on the fence pole and tighten the lock knobs. Make sure the centering pin
is stable and all adjustment knobs are tightened before operating the router.
15