Wen PW21, Руководство пользователя

Страница: 11 / 16

MAINTENANCE & STORAGE
WARNING:
Turn off the pressure washer and remove the power plug prior to performing any inspec-
tion or maintenance work. If trouble persists with your pressure washer, please call our customer help
line at (800) 232-1195 M-F 8-5 Central Time.
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Machine stops dur-
ing operation. 1. You blew a circuit fuse.
2. Nozzle partially blocked. 1. Replace the fuse. Turn off other products sharing
the circuit before doing so.
2. Clean the nozzle.
Machine pulsating 1. Air has collected in the inlet
hose.
2. Insufficient water supply
3. Blocked nozzle.
4. Blocked water filter.
5. Kinked hose. 1. Allow the machine to run while holding the trig-
ger until adequate pressure returns.
2. Make sure the water tap is open as far as pos-
sible.
3. Clean the nozzle.
4. Clean the water inlet adapter filter.
5. Unkink the hose.
Machine doesn’t
turn on. 1. Machine not plugged it.
2. Defective socket.
3. Fuse has blown.
4. Defective extension cord.
5. Bad switch or loose wiring. 1. Plug the pressure washer into a working outlet.
2. Try a different outlet.
3. Replace the fuse.
4. Try it without an extension cord.
5. Open up the back of the unit to check the switch
wiring and replace if necessary.
Fluctuating Pressure 1. Pump bringing in air.
2. Dirty or broken valves.
3. Pump seals are worn out.
1. Tighten the hose connections and make sure
they are air tight.
2. Clean/replace the valves.
3. Order replacement seals (call 1-800-232-1195).
Machine starts and
stops by itself. 1. Leaking pump/spray gun.
2. Broken trigger on spray gun.
3. Thermal sensor activated
4. Ghost in machine. 1 & 2. Call 1-800-232-1195 for assistance.
3. Leave the washer for 5 minutes to cool down.
4. Persuade the ghost to leave.
Machine starts with-
out any water 1. No water supply.
2. Frozen pump/hose.
3. Blocked water filter.
4. Blocked nozzle. 1. Connect the water supply.
2. Thaw out your frozen stuff.
3. Clean out the water inlet adapter filter.
4. Unblock and clean the nozzle.
11
STORING THE PRESSURE WASHER FOR EXTENDED PERIODS:
1. Clean the spray nozzle and water inlet adapter before preparing for storage.
2. Only store your pressure washer indoors where the temperature will stay above freezing (32°F/0°C).
3. Always keep the pressure washer upright on a level surface. Cover the machine to protect it from dust.
4. It is recommended to run the unit with a pump protector or a pump conditioner before storing the unit for
long periods of time. Follow the directions on your preferred pump protector or conditioner for proper use.