Safety is a combination of common sense, staying alert and knowing how your item works.
SAVE THESE SAFETY INSTRUCTIONS.
WARNING:
To avoid mistakes and serious injury, read and understand this entire instruction manual.
Learn the tool’s applications, limitations, and possible hazards. These safety rules cannot address every
possible scenario you may encounter, so please use common sense and caution when using the tool.
WORK AREA SAFETY
1. Keep your work area clean, uncluttered, and well lit. Cluttered areas invite injuries and accidents. Keep the
ground clear of tripping hazards. Do not work on floor surfaces that are slippery with sawdust or wax.
2. Observe work area conditions. Keep bystanders at a safe distance from the work area. Never allow children or
pets near the tool.
PERSONAL SAFETY
1. Wear ANSI Z87.1-approved safety goggles and work gloves. Do not wear loose clothing, neckties, or jewelry
and tie back long hair. Wear additional safety gear as required by local, state and federal regulations.
2. Stay alert - watch what you’re doing and use common sense when using the tool. Do not use while you are tired
or under the influence of drugs, alcohol or medication that may affect your ability to properly use the tool. Even a
moment of inattention may result in serious personal injury.
3. Do not overreach. Keep proper footing and balance at all times.
SAW HORSE USE & CARE
1. Use the right tool for the job. Do not modify or use the saw horse to do a job for which it was not designed.
Unauthorized modification may damage the tool and/or cause personal injuries.
2. Always check for damaged or worn out parts before using the saw horse. Check for alignment of moving parts,
jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation. Any part that
is damaged should be properly repaired or replaced before use.
3. For maximum stability, always use the saw horse on a hard, flat and level surface.
4. Never stand or sit on the saw horse. Do not try to ride this horse.
5. Do not exceed the 1500 lbs loading capacity of the tool. Be aware of dynamic loading, as sudden movement
may briefly create excess load, causing product to fail.
6. Secure the workpiece with clamps or a vise instead of your hand whenever possible.
7. Be careful when raising or lowering the saw horse. Keep fingers and hands clear to avoid getting them trapped.
8. Maintain tools properly. Always keep tools clean and in good working order. Store the saw horse in a dry,
secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before
re-use.
IMPORTANT SAFETY RULES
3
Содержание MSA15
Страница 8: ...THANKS FOR REMEMBERING...
