TOOL PURPOSE
Resurface boards, flatten workpieces, and much more with your WEN Jointer. Refer to the diagram
below to become familiarized with the parts and controls of your jointer.
KNOW YOUR JOINTER
10
ASSEMBLY & ADJUSTMENTS
ATTACH THE FENCE SUPPORT ASSEMBLY
1. Attach the fence support (Fig. 2 - 1) to the jointer with the socket
head bolts and lock washers (Fig. 2 - 2).
2. Insert the locking plate assembly (Fig. 2 - 3) into the support. Posi-
tion the plate so that the upper surface of the lower lip is against the
bottom edge of the support. The dovetail at the top of the plate should
protrude through the slot in the fence support.
3. Secure the plate in position with the fence sliding handle (Fig. 2 - 4)
and the spacer (Fig. 2 - 5).
NOTE:
The fence sliding handle (Fig. 2 - 4) and fence bevel handle (Fig.
3 - 5) are spring-loaded and can be re-positioned as need be. Pull out
on the handle, re-position it, and let it spring back in place.
1
Fig. 2
5
4
2 2
3
Fence
Infeed Table
Infeed Adjustment Knob
Power Switch
Dust Port
Blade Guard
Outfeed Table
NOTE:
A protective coating of lubricating oil has been applied at the factory to guard against rust. Wipe down all
components thoroughly. Apply a light coat of good-quality paste wax to the table and fence to protect the surfaces
and make boards slide smoothly.
Depth Gauge
