Wen JT630H, Инструкция по эксплуатации

Страница: 3 / 28

SPECIFICATIONS
INTRODUCTION
Thanks for purchasing the WEN Benchtop Jointer. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195 .
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your
careful attention and understanding. Always follow the safety precautions to reduce the risk of fire, electric shock
or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-
cident prevention measures.
3
Model Number JT630H JT833H
Motor 120V, 60 Hz, 10A 120V, 60 Hz, 10A
Cutterhead Rotation Speed 12,000 RPM 12,000 RPM
Max Cutting Width 6 Inches 8 Inches
Max Cutting Depth 1/8 Inch 1/8 Inch *
Recommended Cutting Depth 1/32 Inch 1/32 Inch
Number of Blades 12 16
Table Size 30 in. x 6-3/16 in. 33 in. x 8 in. (extensions up to 51 in.)
Fence Size 4-1/4 in. x 19-3/4 in. 4-1/4 in. x 19-3/4 in.
Dust Port Diameter 2-1/2 Inches 2-1/2, 4 Inches
Fence Bevel 0-45° 0-45°
Product Dimensions 30 in. x 17.5 in. x 12.5 in. 34.5 in. x 18.75 in. x 12.5 in.
Weight 36.8 lbs 55.1 lbs
*When jointing boards over 6 inches, reduce maximum cutting depth by 1/32 inch per inch