HEAT GUN SAFETY
1. DO NOT TOUCH
the end of the heat gun during or
directly after operation. Let the gun cool down fully
before touching the tip or any nozzles.
2. NEVER
use this tool as a hair dryer.
3. DO NOT USE A HEAT GUN
near combustible or
flammable materials.
4. TURN HEAT GUN OFF
and give it a moment to
cool down before setting it down on any surface.
5. ALWAYS
maintain a minimum distance of one
centimeter (1/2 inch) between the nozzle and work
surface. Do not press the gun against any surfaces.
6. UNPLUG
the heat gun when not in use.
7. NEVER
direct the air flow of the heat gun towards
yourself, anyone else, or any animals.
8. DO NOT LOOK
into the hot air nozzle during or
directly after operation.
9. NEVER BLOCK
the inlet grill (slits on the side of
the gun) or obstruct the air flow of the unit while the
gun is on.
10. DO NOT STORE
the tool away until it has fully
cooled down.
11. DO NOT HOLD
a work piece in front of the heat
gun without forceps or clamps, as this will risk put-
ting your hand in the pathway of the heat flow.
12. DO NOT INSERT
anything in the end of the heat
gun.
13. LET THE GUN COOL DOWN
before changing ac-
cessories.
14. ONLY USE THIS HEAT GUN
for its intended pur-
poses.
15. DO NOT DROP
or use this tool to hit other ob-
jects. Do not insert sharp objects into the air inlet
grill or pierce/jab internal parts.
HEAT GUN SAFETY WARNINGS
WARNING!
Do not operate the power tool until you have read and understood the following instructions and
the warning labels.
6