Wen DW6395, Инструкция по эксплуатации, Страница: 9 / 16

ASSEMBLING THE DRYWALL SANDER
1. Connect the upper shaft (Fig. 1 - 1) and the lower shaft (Fig.
1 - 2) of the drywall sander together by lining up the two shaft
ends and securing the locking latches (Fig. 1 - 3) on either side
of the shaft connection.
2. Attach the sandpaper (Fig. 2 - 1) of your choice to the face of
the hook and loop base pad (Fig. 2 - 2). Ensure the holes on the
sandpaper align with the holes on the bottom of the pad.
3. The use of a dust collection device is highly recommended.
Connect the dust hose (Fig. 3 - 1) to the bottom of the unit (Fig.
3 - 2) and then connect the other end of the dust hose directly to
your dust collection device (Fig. 3 - 3) or use one of the provided
dust port adapters depending on the port on your dust collection
device.
ASSEMBLY & ADJUSTMENTS
Fig. 1
1
1
WARNING! To avoid injury from accidental startups,
turn switch OFF and remove the plug from the power source
outlet before making any adjustments.
9
TOOL PURPOSE
Sand plastered walls, ceilings, and interior walls, as well as remove paper residues, paint layers, coatings, adhesive
residues, and loose plaster with your WEN Drywall Sander. Refer to the diagram below to become familiarized with
the parts and controls of your drywall sander.
KNOW YOUR DRYWALL SANDER
Power Switch
Hose Connection
Handle
Variable Speed
Motor
Hook & Loop Base Pad
Upper Shaft
Lower Shaft
Arm Locking Latch
Head Angle Lock Knob
Fig. 2
Fig. 3
2
2
3
3
1
2
3