ASSEMBLING THE BAR STOOL
1. Place the upper leg (Fig. 1 - 1) over the
lower leg (Fig 1 - 2).
2. Slide the support ring (Fig. 1 - 3) over the
leg assembly and secure with four M6x50
round head bolts (Fig. 1 - 4), washers (Fig. 1
-5), and nuts (Fig. 1 - 6).
NOTE:
The round head bolts should be
inserted through the support ring first and
then the upper and lower legs.
3. Insert four M6x35 bolts (Fig. 2 - 1)
through the swivel plate (Fig. 2 - 2) and into
the corresponding holes on the legs. Secure
the bolts with four nuts and tighten.
4. Place the seat (Fig. 3 - 1) cushion face
down on a flat surface. Place the swivel
assembly (Fig. 3 - 2) on the bottom of the
seat so that the holes on the swivel line up
with the holes on the bottom of the seat.
6. Insert four M6x14 bolts (Fig. 3 - 3)
through the swivel plate and into the holes
on the bottom of the seat. Loosely secure
the bolts to the seat bottom to ensure proper
alignment. Once positioned, tighten the bolts
completely.
NOTE:
Periodically check to make sure that
all bolts and nuts remain tightened. Do not
use the seat if any components are damaged
or loose.
INSTRUCTION MANUAL
ASSEMBLY
Fig. 1
Fig. 2
Fig. 3
1
2
3
4
5
1
2
1
2
3
No.
Part No.
Description
Qty.
1
73014-01
Seat
1
2
73014-02
Swivel
1
3
73014-03
Flat Washer
12
4
73014-04
Round Phillips
Head Bolt M6x14
4
5
73014-05
Round Phillips
Head Bolt M6x35
4
6
73014-06
Nut M6
12
No.
Part No.
Description
Qty.
7
73016-07
Lower Leg
1
8
73016-08
Upper Leg
1
9
73014-09
Round Phillips
Head Bolt M6x50
8
10
73014-10
Support Ring
1
11
73014-11
Foot Pad
4
EXPLODED VIEW & PARTS LIST
6
1
2
5
3
4
6
8
7
9
10
11
