Wen 6559, Руководство пользователя, Страница: 10 / 24

Fig. 6
Fig. 4
Fig. 2
Fig. 3
ASSEMBLY AND ADJUSTMENTS
10
WARNING:
Do not plug in or turn on the tool until it is fully assembled according on the
instructions. Failure to follow the safety instructions may result in serious personal injury.
2. Continue sliding the fence until the arc groove (Fig. 3 - 2)
lines up with the center of the fence bracket assembly.
3. Using the included hex wrench, tighten the four flat-head
screws (Fig. 3 - 1) on the fence bracket assembly to fix the fence
in place.
ATTACH THE FENCE TO THE JOINTER
1. Using the included hex wrench, remove the two socket-head
screws (Fig. 4 - 2) from the jointer.
2. Fix the fence sliding base (Fig. 4 - 1) to the jointer with the two
screws that were removed in the previous step.
3. Use the lock handle (Fig. 5 - 2), flat washer (Fig. 5 - 3), and
square nut (Fig. 5 - 4) to fix the fence assembly (Fig. 5 - 1) to the
fence sliding base (Fig. 4 - 1).
INSTALL THE DUST CHUTE
1
2
2
1
1
2
NOTE: You may need to loosen the nuts in order to get them
into the T slots.
ASSEMBLE THE FENCE
1. Slide the fence (Fig. 2 - 1) onto the fence bracket assembly
(Fig. 2 - 2), matching the nuts on the fence bracket assembly
with the T slots on the fence (see circled parts in Fig. 2).
1
2
3
Fig. 5
1
2
3
4
1. Slide the dust chute
(Fig. 6 - 2) onto the end
of the chip exhaust (Fig.
6 - 1).
2. Tighten the Phillips-
head screw (Fig. 6 - 3) to
secure the dust chute on
the chip exhaust.