Wen 61710, Руководство оператора

Страница: 3 / 15

3
General Safety Rules
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols,
and the explanations with them, deserve your careful attention and understanding. The safety
warnings do not by themselves eliminate any danger. The instructions or warnings they give are
not substitutes for proper accident prevention measures.
Symbol Meaning
Safety Alert Symbol:
Indicated danger, warning, or caution, may be used in conjunction with other symbols or
pictographs. Always follow the safety precautions to reduce the risk of fire, electric shock
and personal injury.
NOTE: advising you of information or instructions is vital to the operation or maintenance of the
equipment.
Important
Servicing requires extreme care and knowledge and should be performed only by a qualified
service technician. For service, we suggest you return the tool to WEN PRODUCTS a division of
Great Lakes Technologies, LLC. for repair. When servicing, use only identical WEN
®
replacement
parts.
WARNING - Do not attempt to operate this tool until you have read thoroughly and
understand completely all instructions, safety rules, etc…contained in this manual.
Failure to comply can result in accidents involving fire, electric shock, or serious
personal injury. Save this operator’s manual and review frequently for continuing safe operation
and instructing others who may use this tool.
Safe operation of this power tool requires that you read and understand this operator’s manual and
all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing
how your tool works.
“READ ALL INSTRUCTIONS” Failure to follow the safety rules listed below and other basic
safety precautions may result in serious personal injury.

Actuating tool may result in flying debris, collation material, or dust which could harm
operator’s eyes.
Operator and others in work area MUST wear safety glasses with side shields.
These safety glasses must conform to ANSI Z87.1 requirements
(approved glasses have “Z87”
printed or stamped
on them). It is the employer’s responsibility to
enforce the use of eye
protection equipment by the tool operator and other people in the work area.

Always wear appropriate personal hearing and other protection during use. Under some
conditions and duration of use, noise from this product may contribute to hearing loss.

Use only clean, dry, regulated air. Condensation from an air compressor can rust and damage
the internal workings of the tool.

Regulate air pressure. Use air pressure compatible with ratings on the nameplate of the
tool.
[Not to exceed 120 psi (8.3 bar)] Do not connect the tool to a compressor rated at over
175 psi. The tool operating pressure must never exceed 175 psi even in the event of regulator
failure.