Wen 6010 Скачать руководство пользователя страница 3

3

GENERAL SAFETY RULES

Safety is a combination of common sense, staying alert and knowing how your item works. 

SAVE THESE 

SAFETY INSTRUCTIONS. 

WARNING: 

To avoid mistakes and serious injury, do not plug in your tool until the following 

steps have been read and understood. 
 

1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications, limitations, 
and possible hazards. 

2. AVOID DANGEROUS CONDITIONS. Do not use power tools in wet or damp areas or expose them to 
rain. Keep work areas well lit. 

3. DO NOT use power tools in the presence of flammable liquids or gases. 

4. ALWAYS keep your work area clean, uncluttered, and well lit. DO NOT work on floor surfaces that are 
slippery with sawdust or wax. 

5. KEEP BYSTANDERS AT A SAFE DISTANCE from the work area, especially when the tool is operating. 
NEVER allow children or pets near the tool. 

6. DO NOT FORCE THE TOOL to do a job for which it was not designed. 

7. DRESS FOR SAFETY. Do not wear loose clothing, gloves, neckties, or jewelry (rings, watches, etc.) when 
operating the tool. Inappropriate clothing and items can get caught in moving parts and draw you in. ALWAYS 
wear non-slip footwear and tie back long hair. 

8. ALWAYS remove the power cord plug from the electrical outlet when making adjustments, changing parts, 
cleaning, or working on the tool. 

9. AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the OFF position before plugging 
in the power cord. 

10. REMOVE ADJUSTMENT TOOLS. Always make sure all adjustment tools are removed from the saw 
before turning it on. 

11. NEVER LEAVE A RUNNING TOOL UNATTENDED. Turn the power switch to OFF. Do not leave 
the tool until it has come to a complete stop. 

12. NEVER STAND ON A TOOL. Serious injury could result if the tool tips or is accidentally hit. DO NOT 
store anything above or near the tool. 

13. DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant rubber-soled 
footwear. Keep the floor clear of oil, scrap, and other debris. 

Содержание 6010









Отзывы: