Wen 40441, Руководство пользователя, Страница: 11 / 18

11
SETTING THE CUTTING HEIGHT
To raise and lower the mower’s cutting blade, set the blade height adjustment lever into the preferred height (Fig.
E). The lower notches closer to the front side of the wheel bring the blade lower to the ground. The lowest notch
(Fig. E) represents a 1.5-inch cutting height. The highest notch coincides with a 4-inch cutting height.
ATTACH/REMOVE THE BATTERY (FIG. F)
Note: The battery is not fully charged at the time of purchase. Before using the mower for the first time, place the
battery in the charger and charge it fully.
The WEN 40V Lawn Mower is equipped with two slots for batteries. Open the clear lid to reveal slots for both
batteries. To insert the battery, slide it into one of the two slots until it clicks into place. Make sure the battery is
fully inserted and latched into position. To remove the battery, press the release tab and slide the battery out of
the lawn mower.
There are battery meters available on both the batteries themselves as well as on the back side of the battery
holder. If you are curious as to the remaining life of a battery, press the indication button on either of these battery
meters.
WARNING: Do not insert or remove the battery while the trigger is pressed or while the blade is in motion.
Lowest
Cutting Height
Fig. D
Fig. E
ASSEMBLY
INSTALLING THE SIDE CHUTE (FIG D)
NOTE: Do not install the grass catcher, the side chute
or the mulching plug simultaneously. When one is in-
stalled, the other two should not be.
1. Lift up the side discharge door.
2. Place the hooks found on the side chute into their
respective grooves underneath the hinges of the side dis-
charge door. If correctly installed, the side chute should
be positioned approximately parallel to the ground.
3. Let go of the side discharge door.
Fig. F