SETTING THE CUTTING HEIGHT (FIG. E)
To raise and lower the mower’s cutting blade, set the blade height adjustment lever into the preferred height (Fig. E).
The lower notches closer to the front side of the wheel bring the blade lower to the ground. The lowest notch (Fig.
E) represents a 1.5-inch cutting height. The highest notch coincides with a 4-inch cutting height.
ATTACH/REMOVE THE BATTERY (FIG. F)
NOTE:
The battery is not fully charged at the time of purchase. Before using the mower for the first time, place the
battery in the charger and charge it fully.
The WEN 40V Lawn Mower is equipped with two slots for batteries. Open the clear lid to reveal slots for both bat-
teries. To insert the battery, slide it into one of the two slots until it clicks into place. Make sure the battery is fully
inserted and latched into position. To remove the battery, press the release tab and slide the battery out of the lawn
mower.
There are battery meters available on both the batteries themselves as well as on the back side of the battery holder.
If you are curious as to the remaining life of a battery, press the indication button on either of these battery meters.
Lowest
Cutting Height
FIG. D
FIG. E
INSTALLING THE SIDE CHUTE (FIG D)
NOTE:
Do not install the grass catcher, the side chute or
the mulching plug simultaneously. When one is installed,
the other two should not be.
1. Lift up the side discharge door.
2. Place the hooks found on the side chute into their re-
spective grooves underneath the hinges of the side dis-
charge door. If correctly installed, the side chute should
be positioned approximately parallel to the ground.
3. Let go of the side discharge door.
FIG. F
ASSEMBLY & ADJUSTMENTS
WARNING!
Do not insert or remove the battery while the trigger is pressed or while the blade is in motion.
13
