Wen 3975, Руководство пользователя

Страница: 8 / 14

88
ADJUSTMENTS
CUTTING ANGLE ADJUSTMENT
This band saw cuts angles anywhere from 0 to 60 degrees.
To make an adjustment to the cutting angle:
1. Loosen the angle lock handle (Fig. D - 1).
2. Turn the swivel support (Fig. D - 2) until the mark on the
support matches the desired angle on the scale.
3. Lock the angle lock handle.
Fig. D
1
2
Fig. E
SLIDING BLADE GUIDE
The sliding blade guide must be adjusted before every cut to
a new workpiece. Without the adjustment, the resulting cut
could be unclean and jagged.
1. Loosen the blade guide lock handle (Fig. E - 1).
2. Slide the blade guide to move it closer to the workpiece.
3. Retighten the blade guide lock handle.
1
CUTTING SPEED
The cutting speed always depends on the material being cut. To select
the most suitable speed, turn the control knob (Fig. F - 1) to increase
or decrease the speed, with 125 FPM as the lowest setting and 260
FPM the highest.
For common steel, use a speed between 125 and 180 FPM.
For aluminum or alloy, use the maximum speed of 260 FPM.
For pipes, use a speed between 220 and 260 FPM.
1
Fig. F