Wen 3970, Инструкция по эксплуатации

Страница: 6 / 24

SAW BLADE SAFETY
1. Always wear protective gloves when handling saw
blades.
2. Only use blades with correct size and type for both
your Metal Bandsaw and your workpiece.
• The size of the saw blade is 64-1/2 x 1/2 inches.
• The blade material is bimetal with 14 TPI.
3. Never use damaged or deformed saw blades. Only
use sharp blades.
4. Install the saw blade in the correct orientation indi-
cated in the instructions (see “Changing the Saw Blade”,
page 16).
5. Keep hands out of path of saw blade. Never use your
hands to remove metal chips by hangd. Use a brush at
all times.
6. Never reach around saw blade or reach in back of the
saw blade.
7. The use of accessories or attachments not recom-
mended by the manufacturer may result in a risk of per-
sonal injury.
PERSONAL SAFETY
1. Operate in a well ventilated area. Keep the floor area
around the Metal Bandsaw level and free of slippery
substances or other tripping hazards.
2. Wear ANSI-approved safety goggles to protect your
eyes from sparks and metal chips. Use hearing protec-
tion to protect yourself from hearing loss.
3. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in close
proximity to pacemakers could cause pacemaker inter-
ference or pacemaker failure.
4. Wear work gloves when handling saw blades. DO
NOT wear gloves, neckties, jewelry, or loose clothing
while operating the saw.
5. Metal chips are harmful to your health. Use NIOSH-
approved dust masks or other respiratory protection
during operation and cleaning.
6. Always turn off and unplug the Metal Bandsaw before
making any adjustments or repair tasks. Never adjust
the Metal Bandsaw or the workpiece while the saw is
running.
7. Only use the Metal Bandsaw to cut metal.
PREPARING THE METAL BANDSAW
When transporting the Metal Bandsaw, use the trans-
portation handle and roll the assembled saw with the
wheels. Never carry the device by its guards or its
accessories.
1. Examine the Metal Bandsaw for any damaged or
missing parts. Replace or repair damaged parts before
operation. Periodically check that all nuts, bolts and
other fasteners are properly tightened.
SECURE YOUR WORKPIECE
1. To avoid blade binding or loss of control, always se-
cure the workpiece to a stable platform, ensuring that
body exposure is minimized. Use clamps to secure the
workpiece. Never perform any operation freehand.
SPECIFIC RULES FOR YOUR METAL BANDSAW
WARNING! Do not operate the power tool until you have read and understood the following instructions
and the warning labels.
6