Wen 3920, Руководство пользователя

Страница: 6 / 22

6
SPECIFIC RULES FOR THE SCROLL SAW
WHEN OPERATING THE SCROLL SAW
1. To avoid injury from unexpected scroll saw movement:
- Use the scroll saw on a firm level surface with adequate space for handling and supporting the
work piece.
- Be sure the scroll saw cannot move when operated. Secure the scroll saw to a workbench or
table with wood screws or bolts, washers and nuts.
2. Before moving the scroll saw, unplug the power cord from the electrical outlet.
3. To avoid injury from kickback:
- Hold the work piece firmly against the tabletop.
- Do not feed the work piece too fast while cutting. Only feed the work piece at the rate the saw
will cut.
- Install the blade with the teeth pointing downward.
- Do not start the saw with the work piece pressing against the blade. Slowly feed the work piece
into the moving blade.
- Use caution when cutting round or irregularly shaped work pieces. Round items will roll and
irregularly shaped work pieces can pinch the blade.
4. To avoid injury when operating the scroll saw:
- Obtain advice from a qualified person if you’re not thoroughly familiar with the operation of
scroll saws.
- Before starting the saw, make sure the blade tension is correct. Recheck and adjust tension as
needed.
- Make sure the table is locked into position before starting the saw.
- Do not use dull or bent blades.
- When cutting a large work piece, make sure the material is supported at the table height.
- Turn the saw OFF and unplug the power cord if the blade jams in the work piece. This condi-
tion is usually caused by sawdust clogging the line you are cutting. Wedge open the work piece
and back out the blade after turning off and unplugging the machine.
ELECTRICAL INFORMATION
GROUNDING INSTRUCTIONS
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least
resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an
electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be
plugged into a matching outlet that is properly installed and grounded in accordance with ALL local
codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper outlet in-
stalled by a licensed electrician.