manualshive.com logo in svg

Wen 33606, Инструкция по эксплуатации, Страница: 3 / 20

Поделиться
Скачать
Wen 33606 Скачать руководство пользователя страница 3

SPECIFICATIONS

INTRODUCTION

Thanks for purchasing the WEN Jig Saw. We know you are excited to put your tool to work, but first, please take 

a moment to read through the manual. Safe operation of this tool requires that you read and understand this op-

erator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety 

concerns, as well as helpful assembly and operating instructions for your tool. 

NOTE:

 The following safety information is not meant to cover all possible conditions and situations that may occur. 

WEN reserves the right to change this product and specifications at any time without prior notice.

At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual, 

please visit 

wenproducts.com

 for the most up-to-date manual or contact our customer service at 

1-800-232-1195

.

Keep this manual available to all users during the entire life of the tool and review it frequently to maximize 

safety for both yourself and others. 

Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your 

careful attention and understanding. Always follow the safety precautions to reduce the risk of fire, electric shock 

or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-

cident prevention measures. 

Model Number

33606

Motor

120V AC, 60 Hz, 6.6A

Strokes Per Minute

0 to 3300 SPM

Wood Cutting Capacity

4-1/4 Inches (110mm)

Metal Cutting Capacity

3/8 Inches (10mm)

Bevel Angle

45

°

 Left and Right

Dust Port Outer Diameter

1-1/2 Inches

Assembled Dimensions

9-3/8 in. x 3-1/4 in. x 8-5/8 in.

Product Weight

5.4 lbs

3

Содержание 33606





















Отзывы:

Нет отзывов