6
incoming ring to this FXS port.
Connector
Description
Power Switch
This is AC power input switch. When it was turned ON, the
LED will light up green.
WAN
Provide RJ-45 Ethernet 10/100BaseT connection. Connect
SIP IP network to WAN port in operation.
LAN
Provide RJ-45 Ethernet 10/100BaseT connection. Only
provide configuration to this gateway locally via
computer’s IE Web Browser.
Reset
Press this Reset switch and
hold on at least 5 seconds
will
force this gateway’s configuration resume factory default
setting.
COM
RS-232 DB 9-pin male console cable connection.
It is only
used for professional engineer to debug this gateway
according to instructions from supplier/vendor.
Unauthorized access to this console port may damage and
crash boot code and can’t be resumed normal operation.
1-4 Rear Panel: Phone cable connection
Figure 1-4 rear panel for FXS cable connection
Socket
Description
1 – 8, RJ-45
There are 32 FXS 2-wire loop start telephone ports to
connect with analog telephone set. Each RJ-45 socket
consists of four-pair FXS ports. Here are eight sockets of
RJ-45 to support 32 ports FXS.
1 – 2, RJ-21
Telecom
Connector
Here are two sockets of RJ-21 female telecom connector
to provide 32 FXS ports. Each RJ-21 socket comprises 16
FXS ports.
AC electric Socket Electric AC voltage input socket.
Each FXS port number is tied together in parallel with that in RJ-21. That means each
FXS port can be accessed via RJ45 socket or RJ-21 telecom connector.
