WellGate 2626 User Manual EN-V1.00
Copyright © 2007 Welltech Computer Co., Ltd. All right reserved.
25
Updating the firmware by TFTP
(Figure 20)
1.
First, download the TFTP program from our website
http://www.welltech.com/support/utility.htm
. Unzip the TFTP to a directory
that you desire in your hard drive and execute the TFTP program. Make sure
that the TFTP program points to the directory of where your firmware is
stored. Now, leave the TFTP program running and switch back to the
WG2626 web configuration interface.
2.
Under Management => Upgrade firmware (see figure 20) select TFTP mode in
the drop down list.
3.
Key in the IP address of the TFTP server and specify the correct filename of
the firmware.
4.
Press the Start button (next to the Target file name text box) to execute the
upgrade process.
5.
Please wait while the device updates itself with the firmware.
6.
After the update process is finish, you will be taken to a web page indicating
that it was successful (see figure below).
7. Press the “
Reboot
” button to apply the changes.
All manuals and user guides at all-guides.com
all-guides.com
