Welltech Technology Co., Ltd.
73
3.2.11
T.38 FAX
To change your T.38 FAX, click
Configuration
, and then click the
T.38 FAX
table. The
screen appears as shown.
Figure 3.2.11 T.38 FAX
The following table describes the table in this screen
Table 3.2.11 T.38 FAX
Label
Description
Mode
Select Enable option if your will use T.38 FAX function. The
default is Enable.
T.38 Start Port
Enter the Start Port Number. The default is 4000.
T.38 End Port
Enter the End Port Number. The default is 49999.
T.38 Redundancy
Enter the Redundancy count. The default is 2.
Apply
Click on the Apply button to save your customized settings and
exit this screen.
Cancel
Click on the Cancel button to begin configuration this screen
afresh.
