73209-US
X
-20
21-08-09 © 20
21 WELLSPECT
. All rights r
eserv
ed.
QUICK GUIDE ADULT USE
Preparation & Use
(catheter)
36-38 °C
Note:
Make sure that the control
unit is charged and parameters
set before starting on this page.
Wellspect HealthCare, Aminogatan 1, P.O. Box 14, SE-431 21 Mölndal, Sweden. Phone: +46 31 376 40 00.
Manufacturer
2797
Regular
1=100ml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1=100ml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
Small
1=100ml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1=100ml
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
1. Preparation
1. Fill water to the upper mark of
the container and close the lid.
2. Connect the water container tube
between water container and
control unit (dark blue).
3. Connect the catheter tube between control
unit and catheter (light blue/white).
Note: Follow colour coding and symbols.
Use luke warm and clean water only.
Make sure the safety valve on the lid
is not blocked during the procedure.
5. Disassembly
1. Open the water container lid.
2. Disconnect the tubes from control unit.
3. Empty water from the tubes.
4. Turn off the Navina Smart control unit and empty water from the control
unit.
5. Disconnect the
single use catheter
and dispose as household
waste. It must not be reused and not flushed down the toilet.
6. Disconnect the tube from water container and empty water.
7. Clean and dry the tubing and water container with a cloth
and mild soapy water. The control unit must only be wiped clean.
Note: Tick a box in the usage calendar (see instructions for use) after each
use to keep track of when to exchange the water container and tube set.
Transfer data
see instructions on opposite side
2. Activation
1. Turn on the Navina Smart control
unit by pressing
.
2. Press any button to go to the activation mode
.
3. Press and hold
to pump water until
the catheter is covered with water (making
it slippery) and the
icon appears on the
screen.
4. Press
when you are ready to insert the
catheter to proceed to the Instillation mode.
Note: Do not add additional lubricant.
4. Evacuation
1. Press and hold
to deflate the balloon completely.
2. Remove the catheter gently.
3. Allow bowels to empty. If needed to start emptying, relax
for 10-15 minutes, lean forward, cough or massage abdomen.
Do not turn off the control unit.
3
1.0
3. Instillation
1. Insert the rectal catheter according to your healthcare professional’s instruction.
2. Press and hold
to inflate the catheter balloon until the desired balloon size if
reached. If repositioning of catheter is needed, deflate balloon completely first.
3. Gently pull the catheter slightly down to seal the rectum.
4. Instill water by pressing
.
Note: Never insert catheter with force. If experiencing resistance, remove
catheter, and follow see instructions for use trouble shooting section. If resistance
continues, stop using irrigation and seek help from a health care professional.
Do not turn off the control unit.
3
3
3
3
3
3
7
5
1
2
3
1
2
2
3
1
2
3
1
6
4
3
2
