Wells SC-11, Руководство пользователя

Страница: 12 / 20

TROUBLE SHOOTING SUGGESTIONS
10
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
No power to warmer
Circuit breaker off or tripped Reset circuit breaker
Unit not plugged in
Make sure unit is plugged in to
power receptacle
Temperature control not set
Set control to desired
temperature
Internal damage
Contact you Authorized Wells
Service Agency for repairs
Warmer trips circuit breaker
Wet insulation Allow to dry or replace insulation
Pan leaking or other internal
damage Contact your Authorized Wells
Service Agency for repairs
Internal damage
Contact your Authorized Wells
Service Agency for repairs
Warmer slow to heat
Warmer used in "dry" mode
(inset) slow to heat; or, used "wet"
with insufficient water in well
Warmer will heat the inset faster
when used in "wet" mode. Allow
to cool, then add 1" of water to
well
(Deluxe)
Mineral deposits in well acting
as a insulator Clean well with delime cleaner.
DO NOT USE ON ALUMINUM
SURFACES!
(SC-7 and SC-11)
Mineral deposits in well acting
as a insulator
Remove deposits with a plastic
scouring pad.
Connected to wrong voltage
Verify supply voltage (must
match voltage on warmer
nameplate)
Too much water in well
Remove water from pan until no
more than 1” of water remains in
well
Warmer will not heat
There are no user-serviceable
components in this appliance.
In all instances of damage or
malfunction, contact your
Authorized Wells Service Agency
for repairs.
004
p/n
2M
-30793
2 Owner
s M
anual
Counter
top
Soup
Cooker
s