Wells HDG-2430G Скачать руководство пользователя страница 5

This appliance is intended for use in commercial establishments 
only. 

 
This appliance is intended to prepare food for human consumption.  
No other use is recommended or authorized by the manufacturer or its 
agents. 

 
This appliance must be installed by a technician qualified and certified 
or licensed to install gas-fired equipment.  A licensed technician must 
perform the initial start-up and adjustment of the appliance. 

 

Operators of this appliance must be familiar with the appliance use, 
limitations and associated restrictions.  Operating instructions must be 
read and understood by all persons using or installing this appliance.

 

 

Cleanliness of this appliance is essential to good sanitation.  Read and 
follow all included cleaning instructions and schedules to ensure the 
safety of the food product. 

 

DO NOT submerge appliance or burners in water.  This appliance is 
not jet stream approved.  DO NOT direct water jet or steam jet at this  
appliance, or at any control.  DO NOT splash or pour water on, in or 
over any controls. DO NOT wash counter around this appliance with 
water jet.  Burners which have become wet must be thoroughly dried 
before use. 

 
Burner and grate surfaces will be very hot when in use.  Contact will 
cause severe injury. 

 
This appliance must be operated with the supplied legs properly       
installed 

 
Do not operate this appliance if the smell of gas is present.  Turn off   
all gas supply valves and move to a remote location to call your        
Authorized Wells Service Agent for service.

 

 

The technical content of this manual, including any parts breakdown 
illustrations and/or adjustment procedures, is intended for use by  
qualified technical personnel only. 

 

Any procedure which requires the use of tools must be performed by a 
qualified technician. 

 

This manual is considered to be a permanent part of the appliance.  
This manual and all supplied instructions, diagrams, schematics, parts 
breakdown illustrations, notices and labels must remain with the 
appliance if it is sold or moved to another location. 

This appliance conforms to NSF Standard 4 for sanitation only if 
installed in accordance with the supplied 

Installation Instructions 

and 

maintained according to the instructions in this manual. 

 
This appliance meets ANSI Z.83.11 specifications for gas-fired food 
service equipment. 

 
This appliance is Canadian Standards Association design certified for 
gas operation

 

 

WARNING: 

FIRE HAZARD 

 

All servicing of the gas       
supply and combustion    
components of this appliance 
must be performed by a  
technician trained and        
certified in the maintenance 
of gas appliances. 
Improper servicing of gas 
equipment can result in fire 
and explosion.

 

 

CAUTION: 

HOT SURFACE 
 

Exposed surfaces can be hot 
to the touch and may cause 
burns. 

STD 4 

AGENCY LISTING INFORMATION 

PRECAUTIONS AND GENERAL INFORMATION 

122 

  306

626 

 OpM

anual 

for

 HDG-Seri

e

Griddle

s

 

Содержание HDG-2430G

















Отзывы: