7 of 8
Wellness Supply Group
V001
ii) Functions
The Rx AP Start is equipped with two functions: Passive Exercise Mode and Active Exercise
Mode.
Passive Exercise Mode is built for users who have limited strength or no strength at all. The
powered assistance will help users who need rehabilitation exercise.
Active Exercise Mode is built for users who would benefit from increased strength. The active
exercise is self-movement by the thus improving their overall strength.
a) Passive Exercise Mode
From the Home Page, select Passive Key. This will take you to the Passive Panel where you
can choose one of two Passive Exercise Modes: Pre-set Program and Manual Setting.
Pre-set Program:
This is the simplest way to use the Rx AP Start as all the user needs to do is
press the Start / Stop Key and a 30-minute exercise program will commence. The user can
easily change the RPM during exercise by pressing the Up Key to increase the Level/RPM or
the Down Key to decrease the level/RPM.
The following shows Level against RPM:
The exercises can be done in forward or reverse. This bi-directional motion is available while in
Active or Passive Mode. To reverse direction, press the REVERSE Key, the unit will slow down
gradually, stop and then start to move in the opposite direction increasing to the previously set
speed.
Manual Setting:
To choose this setting, before pressing the Start / Stop Key, the user can set
the:
•
exercise workout time by pressing the Up or Down Keys until the desired time is displayed.
The time range is from 5 to 60 minutes and increases/decreases in 5-minute intervals.
•
RPM by pressing the Up or Down Keys in the RPM panel until the desired RPM is showing.
The RPM range is from 10 to 60 and increases/decreases in increments of 5 RPM.
The user can easily change the RPM during exercise by pressing the Up Key to increase the
