10
3. Starting
Assemble soldering iron rest (see exploded drawing).Place
the soldering iron in the safety rest. Insert the soldering iron
plug into the connection bush (5) of the control unit and lock
by turning to the right. Check that the power supply corre-
sponds to the specifications on the name plate and that the
power switch (1) is in the OFF position. On version that can
be switched, set the voltage on selection switch (8) (set in
the factory to 240 V ). Connect the control unit to the power
supply. Set the temperature at the rotary potentiometer (3).
Switch on unit at the supply switch (1). Green LED (2) will
illuminate. This LED functions as the optical regulator.
Constant illumination means that the system is
overheating. The blinking light signals that the operating
temperature has been reached.
Maintenance
The transition between the heating element / sensor and
the tip of the soldering iron may not come in contact
with dirt, foreign particles or become damaged, since
this affects the precision of the temperature control.
4. Equipotential bonding
The various circuit elements of the 3,5 mm jack bush (4)
make 4 variations possible:
Hard-grounded:
No plug (delivery form)
Equipotential bonding:
With plug, equalizer at center
contact (impedance 0 ohms)
Potential free:
With plug
Soft-grounded:
With plug and soldered resi
stance.
Grounding with set
resistance value.
5. Instructions for use
For initial heating, coat the selective tinnable tip with
solder. This removes any oxidation or dirt on the tip which
may have occurred during storage. During pauses between
soldering and before storing the soldering iron, ensure that
the tip of the soldering iron is well coated. Do not use
aggressive flu- xing agents.
Note: Always ensure the proper position of the soldering
iron tip.
These soldering irons have been adjusted for an average-
size tip. Deviations can occur due to exchanging of the tip
or using other tip designs.
6. Accessories
5 29 161 99 Soldering iron set WSP 80
5 33 131 99 Soldering iron set MPR 80
5 33 112 99 Soldering iron set LR 21, antistatic
5 33 113 99 Soldering iron set LR 82
5 33 133 99 Soldering iron set WTA 50
5 27 028 99 Preheating plate WHP 80
5 33 155 99 Soldering iron set WMP
5 25 030 99 Thermal insulating unit WST 20
7. Scope of supply
WS 81
Control unit
Soldering iron WSP 80
Power cable
Operating instructions
Soldering iron rest
Jack
WS 51
Control unit
Soldering iron LR 21
Power cable
Operating instructions
Soldering iron rest
Jack
PU 81
Control unit
Power cable
Operating instructions
Jack
Illustration: Circuit diagram, see Page 43
Illustration: Exploded view, see Page 44 + 45
Subject to technical alterations and amendments!
Engli
Содержание WS 81
Страница 1: ...WS WS ...
Страница 4: ...43 Circuit ...
Страница 5: ...44 WS51 ...
Страница 6: ...45 WS ...