Weller WD1, Руководство по эксплуатации

Страница: 9 / 22

77
EEnngglliisshh
66..11..77 LLoocckk FFuunnccttiioonn ““ ””
The Lock Function locks the soldering station control so
that no setting changes are possible. Radio Buttons II,, IIII,,
aanndd IIIIII remain operational in the lock mode. When the
lock function is selected in the Special Functions menu,
“OOFFFF” and the flashing “
” symbol appears in the
menu display. If Radio Buttons II or IIII are depressed
while “OOFFFF” appears in the display, no code is saved.
The UUPP or DDOOW WNN Scroll Keys can be used to enter a 1, 2
or 3-digit Lock code. Confirm the code by depressing
Radio Button IIIIII for 5 seconds. The station is now
Locked and the “
” symbol appears in the main dis-
play.
To unlock, activate the Lock Function in Special
Functions menu 1. “OONN” appears in the display. Enter
the code and confirm by depressing Radio Button IIIIII.
The station is now unlocked.
Switch to previous menu item with Radio Button II.
Switch to next menu item with Radio Button IIII.
66..22 SSppeecciiaall FFuunnccttiioonnss M Meennuu 22
If the UUPP and DDOOW
WNN Scroll Keys are pressed simultane-
ously, after approximately 4 seconds, the menu selection
for the Special Functions is activated and -- 22 -- appears
in the display. Release the Scroll Keys.
Radio Buttons II and IIII are used for menu selection.
66..22..11 FFactory CCoonnttrrooll CCheck FFuunnccttiioonn (( FFCCCC ))
This function checks temperature accuracy of the sol-
dering station and allows modifications if necessary. To
peform the “FCC” function, the soldering tip tempera-
ture must be measured using an external temperature
measuring instrument.
Select the “FCC” High or Low Set point with the UUPP or
DDOOW WNN Scroll Key. After the “FCC” function is complete
at both “Set” points, Radio Button IIIIII is used to exit the
menu.
UUPP Scroll Key: High “Set” point 842°F/450°C
DDOOW
WNN Scroll Key: Low “Set” point 212°F/100°C
RReesseettttiinngg tthhee SSppeecciiaall FFuunnccttiioonnss ttoo FFaaccttoorryy SSeettttiinnggss
Press and hold the IIIIII Radio Button. Then press the UUPP
and DDOOW
WNN Scroll Keys at the same time. "FFSSEE",
“Factory Setting Enabled” appears in the display. The
station is now reset to its factory default settings.
M Meennuu 22
M Meennuu sseelleeccttiioonn EExxiitt
5 sec.
FFCCCC 221122°°FF//110000°°CC
+ 1
- 1
IIII Confirmation
FFCCCC 884422°°FF//445500°°CC
+ 1
- 1
IIII Confirmation
EXIT
EXIT
212°F (100°C)
842°F(450°C)
FFaaccttoorryy
CCoonnttrrooll
CChheecckk
RREEM MOOTTEE IIDD
II IIII IIIIII EEXXIITT