Wellcraft 180 Sportsman, Руководство пользователя, Страница: 60 / 92

Note: If the boat is to be stored indoors or
outdoors, open all drawers, clothes
lockers, cabinets, and doors a little. If
possible, remove the upholstery, clothing,
and rugs. Then hang a commercially
available mildew protector in the head
compartment.
• Charge and install the batteries.
• Check the engines for damage and follow the
manufacturer’s instructions for recommissioning.
• Check the engine mounting bolts for the engines
and bracket to make sure they are tight.
11.3 Recommissioning • Perform all routine maintenance.
• Check all hose clamps and make sure they are tight
and not corroded.
• Pump the antifreeze from the head, fresh and raw
water systems and flush several times with fresh
water.
• Check and lubricate the steering system.
Note: It is important and recommended that the
fitting out procedure for the marine gear
be done by a qualified marine technician.
Read the engine owner’s manual for the
recommended procedure.
• Clean and wash the boat.
• Install all upholstery, cushions and canvas.
After Launching:
• Carefully check the engines and all water systems
and the engine bolts for leaks and proper operation.
•
Check the bilge pump manual and automatic
switches.
Reactivating The Boat After Storage:
• Prime the fuel system and start the engines. When
each engine starts, check the cooling system port
below the engine cowling for a strong strean of
water. This ensures that the cooling pump is
operating.
• Apply a fresh coat of bottom paint on the hull.
• Inspect all thru-hull fittings.
• Inspect the sacrificial anodes and install new anodes
if required.
• Carefully monitor the gauges and check for leakage
and abnormal noises.
• Install the propellers.
• Operate the boat at slow speeds until the engine
temperature stabilizes and all systems are operating
normally.
• Install the drain plug in the hull.
60