wellbots FREEFLY VR, Инструкция по эксплуатации

Страница: 8 / 56

Page 14 of 17 Page 15 of 17
SETTING UP THE FREEFLY VR
e. Check that the vertical axis of the phone screen is in line with the orange line
on the main housing (the orange line in between the lenses). If not, then loosen
the two screws behind (watch out, don’t completely loosen the screws until
they fall out!), and slide the whole plastic device left or right to align. Tighten the
screws after aligning.
Step 4: Setup your Smartphone
a. Adjust the position of the 4 foam blocks to avoid blocking a headphone or USB
port. (Loosen and tighten the screws accordingly);
b. Close the main housing of the Freefly VR by pulling the release handle towards
yourself, and lowering the main housing onto your smartphone;
c. Ensure your smartphone is secured. Make sure the latch is properly engaged
and the smartphone cannot move around. The Freefly VR should be firmly
locked to your smartphone, but not so tight it causes damage to
your smartphone.
SETTING UP THE FREEFLY VR