1. Slide the water reservoir up.
2. Open the lid to fill up the reservoir.
3. Place the reservoir on the base. Make sure it is installed properly.
4. Use the cable to connect the power supply to the device and the power source.
5. The device starts working.
The temperature of the outgoing air will start to decrease in a few minutes. You can vary airflow level
using the rotation wheel on the upper part of the device.
Enjoy your personal microclimate!
Important: During the first use there may appear some technical smell. This is normal
and It will vanish completely after several hours of work.
First start
90
1.
4.
5.
2.
3.
3.
Содержание Evapolar
Страница 1: ...Product Guide Personal air cooler...
Страница 2: ......