DESCRIPTION
Note:
The exterior of each model has a little difference.
Congratulations on your purchase of this product. Please read the instructions carefully before
using the thermometer for the first time, and keep these in a safe place. This product is intended
for the measurement of human body temperature. This product is for home and hospital use,
operator shall be at least 11 years old and patient can be operator.
Operating Instructions
Before using, please disinfect the probe at first. To switch on, press the ON/OFF button next to
the display, a short beep will sound, indicating that the thermometer is operational. At the same
time the thermometer runs a self-check test, during which all the digital segments appear on the
LCD. When the letters "Lo" and a flashing "
°
C " or "
°
F " display, the thermometer is now ready
for use. If the ambient temperature is below 32°C or 89.6
˚°
F, then " Lo
°
C "
or " Lo
°
F " will appear on the LCD and if it is more than 42.9°C or 109.2 °F, then " Hi
°
C " or
“Hi
°
F " will appear on the LCD.
During the reading, the current temperature is displayed continuously and the " °C " or “
°
F
"
symbol flashes. The measurement is completed when a constant temperature value
has been reached. The temperature value is considered constant when the temperature rises less
than 0.1 °C within 16 seconds. As soon as the constant temperature value is
reached, a beep will sound ten times, and the " °C " or " °F " symbol will stop flashing. The
highest temperature measured appears on the LCD. However, please note that this thermometer
is a maximum thermometer, i.e. the displayed temperature can increase slightly if measurement
continues after the beep. This is particularly the case with axillary measurements, should a
temperature value be recorded which approximates the core body temperature.
In this instance please note the description under " Methods of measuring temperature ". When
the measurement is completed, please switch the thermometer off by pressing the ON/OFF
button. After the temperature has been displayed, the thermometer will shut off automatically
in 10 minutes.
Memory function
Turn on the thermometer, the last measured temperature will display on the LCD for
approximately 2s after the self-check. The reading will be over-written when the " °C " or " °F "
flashes, i.e. the thermometer is ready for a next measurement, whether the new measurement is
complete or not.
Thermometric
sensor
LCD
ON/OFF
Button
Battery
compartment
Thermometer tip
