NeoGate TB400 User Manual
22
The scope of time which is allowed to make calls via this route.
·Dial pattern
Outbound calls that match this dial pattern will use this outbound route. There
are a number of dial pattern characters that have special meanings:
X
: Any Digit from 0-9
Z
: Any Digit from 1-9
N
: Any Digit from 2-9
[12345-9]
: Any digit in the brackets (in this example, 1,2,3,4,5,6,7,8,9)
The ‘
.
’ Character will match any remaining digits. E.g.” 9011.” will match any
phone number that starts with 9011, excluding 9011 itself.
The ‘
!
’ will match any remaining digits, and causes the matching process to
complete as soon as it can be determined that no other matches are possible.
Example 1:
NXXXXXX
will match any 7 digits phone number.
Example 2:
1NXXNXXXXX
will match a phone number starting with a 1,
followed by a 3-digit area code, and then 6 digit number.
·Strip digits from front
Allows the user to specify the number of digits that will be stripped from the
front of the phone number before the call is placed. For example, if users must
press 0 before dialing a phone number, one digit should be stripped from the
dial string before the call is placed.
·Prepend these digits before dialing
These digits will be prepended to the phone number before the call is placed. For
example, if a trunk requires 10 digit dialing, but users are more comfortable
with 7 digit dialing, this field could be used to prepend a 3 digit area code to all
7 digit phone numbers before calls are placed. When using analog trunks, a 'w'
character may also be prepended to provide a slight delay before dialing.
·password
Set password for this route
·Strategy
Define the strategy to select trunk
．
Default: Select the trunk from the first.
Sequence: Select the trunk next the last used.
Balance: Select the trunk last recently used.
·Inbound Caller Pattern
Inbound calls that match this dial pattern will use this route. The rule is the
same as Dial Pattern.
