4
NOTE: As a result of continual improvements, the design and
specifications of the product within may differ slightly to the unit
illustrated on the packaging.
•
Always uncoil the power cord before applying power.
•
This product must always be used in the upright position.
•
Do not use this heater with a programmer, timer or any other device that switches the heater on
automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
•
Remove all packaging and check the appliance for any damages during transportation.
•
Ensure a power socket is available to power the heater and that the heater is not directly located
under or in front of a power socket.
•
Ensure the heater is placed on a level surface with enough clearance from its surroundings.
Warning: Do not place the heater on LONG PILE CARPET OR FLOKATI RUGS. Use a heat board if
necessary.
Warning: In order to avoid overheating, do not cover the heater.
Warning
If the supply power cord is damaged, the power cord must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
This product has not been designed for any uses other than those specified in this booklet.
Save These Instructions
Technical Specifications
Power Supply AC 240V ~ 50Hz
Power Consumption 800W
Safety Device
This appliance is fitted with a safety cut-off device which automatically turns the unit off when it is tilted
or tipped over. Always ensure that the unit is placed on flat solid ground before operating.
