INSTALLATION DIAGRAM
THE REMOTE CONTROL
MAINTENANCE AND CLEANING
Maintenance
Attention! Careful and regular maintenance of Infrared Heater is required to attain a long and efficient operation of
your appliance.
Check the cleanliness of the Reflector and IR-Filament at least once a month. If necessary, apply cleaning and
maintenance instructions.
The number of checks may be increased considering the amount of dust in the environment.
Check the deformation of the Reflector, Wire and Frame visually while cleaning the appliance. In case of any
deformation, consult a qualified technician.
Check the power cable and plug visually while cleaning the appliance. In case of any deformation, consult a qualified
technician.
It is recommended to change the reflector every 2 years for more efficient operation.
Cleaning
Attention! Regular and careful cleaning helps your heater to operate efficiently for many years.
Unplug your power cable for your safety before cleaning your appliance.
Take out the front grid wire through the inlets on the frame using a slotted screwdriver.
The reflector and filament must be cleaned with a soft cloth, a smooth brush or cool or dry air. The cloth may be damp
but never too wet and the cleaner should not include any chemicals.
Refrain from using cleaning materials likely to damage the reflector (cleanser etc.).
Reinsert the wire grid using a slotted screwdriver.
One fixed bracket
