ASSEMBLY
1. Assemble the body frame and the base plate together as the following sequences. Remove the mounting screw from
the lower part of the body frame.
2. Insert the power cord through the slot placed in the middle part of the basement and then assemble the body frame
to the base plate.
3. Secure the body frame to the base plate by means of the two mounting screw previously removed.
Insert the power cord through the suitable slots and then fix it by the clamp.
COMPONENTS
1. Body frame
2. Base plate
3. Butterfly (2pcs)
4. Tip-over safety switch rod
5. Power cord
OPERATION
Plug in the appliance. Check that the outlet has at least a 10A current carrying capacity.
Select the speed by suitable switches. Press or turn the oscillating switch to make the heater oscillate.
Press or turn it again to shut off the oscillating movement of the appliance.
MANUAL CONTROL
You can control the unit by manual, it is on the panel of the unit:
Press once the power button, the unit works on 400W, press once again, it settled on 800W, if press three times, it
settled on 1200W.
You can press the swing button to do the setting, press once, it activates for its oscillation, press twice, it deactivates
oscillation.
Press OFF to turn unit off.
SAFETY DEVICE
This appliance is provided with one safety device, the safety device disconnects the appliance when the heater is tilted.
MAINTENANCE
Switch off the appliance first and disconnect the plug from the socket!
Clean the housing with a moist cloth, vacuum cleaner or brush.
Do not use any abrasive or caustic cleaning agents!
Do not use any flammable cleaning agents e.g. petrol or spirit for cleaning the appliance.
Never immerse the appliance in water! Electrical hazard!
Air inlet and outlet area should be cleaned with a vacuum cleaner regularly
If the appliance is not used for extended periods, it must be protected against excessive dust and dirt.
SERVICE
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is
available from our service department. Replacement of the connecting cable must only be carried out by our service
department or by a qualified person (qualified electrician).
STORAGE
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high and too low
