BLADE LEVER
•
The lever is conveniently located near your thumb (if you’re right-handed) so it can easily
be adjusted while the clipper is in your hand.
•
The lever adds versatility to your clipper by allowing you to gradually change the closeness
of your cut without an attachment comb.
•
When the lever is in the uppermost position, the blades will give you the closest cut and
leave the hair very short. Pushing the lever downward gradually increases the cutting
length.
•
In its lowest position, the lever will leave the hair approximately the same length as a #1
comb.
•
The lever will also extend the use of your blades since a different cutting edge is used in
each setting.
•
In addition, if extremely heavy hair cutting has jammed the blades, it will help you remove
hair that has become wedged between the two blades without removing the blades.
•
While the clipper is running, rapidly move the lever form ’close cut” to “longer” cut a couple of
times.
Doing this each time after you have finished using your clipper will help to keep the blades clear
of cut hair if your clipper stops cutting and this does not help, your cutting blades are dulled,
Replace them with new blades.
IMPORTANT SAFEGUARDS
When using electrical appliances, especially when children are present, basic safety precautions
should always be followed, including the following:
To reduce the risk of death or injury by electric shock:
•
Unplug this appliance before cleaning.
•
Do not place or store appliance where it can fall or be pulled into a tub or sink.
•
Do not use while bathing or in a shower.
•
Do not place in, or drop into, water or other liquid.
•
Do not reach for an appliance that has fallen into water. Unplug immediately.
To reduce the risk of burns, electrocution, fire, or injury to persons.
•
Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
