ABOUT PRODUCT
1) The battery charger is designed for charging all types of 12V lead-acid , including WET (Flooded), GEL, MF
(Maintenance-Free), EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat) batteries.
2) Built-in intelligent microprocessor makes charging faster, easier and safer.
3) This charger has safety features, including spark proof, protection for reverse polarity, short circuit, overcurrent,
overcharge and overheat.
4) Auto-memory: after power on, the display window of charger will show the last selected mode (except BOOST
mode). The charger will enter charging mode in 5 seconds around.
5) When the CHARGE light is on, it is on charging; when the CHARGE light is off and FULL light is on, the
charging is completed. But do NOT break the connection immediately. It will automatically switches from full
charge to maintenance status to maintain batteries during prolonged periods of storage.
6) It shows present voltage when VOLTAGE button is pressed.
7) Following is the charger’s technical specification:
AC Input
220-240VAC, 50-60Hz, 2A
DC Output
6VDC, 2A/5A;
12VDC, 2A/5A/10A;
12VDC, 15A, 300s (BOOST);
Temperature Controlled.
Efficiency
85% Approx
Power
280W Max
Start Voltage
> 3V
Charger Type
8 steps, Full-automatic Charging Cycle
Battery Type
All Types of 6V and 12V Lead-acid Batteries
Battery Capacity
2-150Ah (6V), 2-300Ah (12V), Maintains All
Battery Sizes
Boost Mode
300s for 12V Lead-acid Batteries
Housing Protection
IP20
Ambient Temperature
0℃ ~ +40℃
CHARGING MODES
Battery charger has seven (7) modes: STANDBY, 6V/2A, 6V/5A, 12V/2A, 12V/5A, 12V/10A and BOOST. Do not
operate the charger until you confirm the appropriate charge mode for your battery.
Mode
Display
POWER
Light
Explanation
STANDBY
----------
Keep on
Not charging or providing any
power
.
If you want charging to
pause, press ON/OFF button and it
will enter STANDBY mode.
6V/2A
02A
Keep on
Connected to battery, it can turn
into 2A by pressing CURRENT
button. This mode is
recommended for 2-60AH
batteries.
6V/5A
05A
Keep on
Connected to battery, it can turn
into 5A by pressing CURRENT
button. This mode is
recommended for 10-150AH
batteries.
