Well AWAKE, Руководство пользователя

Страница: 4 / 6

INDICATORS
A. Alarm 1 BUZZER
B. Alarm 1 RADIO
C. NAP
D. Alarm 2 BUZZER
E. Alarm 2 RADIO
F. Sleep
PREPARATION FOR USE
This clock radio is AC powered. Use two ‘AAA’ size batteries to keep accurate time during temporary power
interruption. Insert batteries by matching the polarity (+/-) markings in the battery compartment (13).
Please replace all batteries at the same time with only new batteries. Remove all batteries when the clock
radio is not in use for extended periods of time.
Place the clock radio only on protected furniture. Avoid direct sunlight and any area that is exposed to
water or moisture.
Plug power cable (15) into electrical outlet with correct voltage. Check rating labels on the radio. DO NOT
PLUG THE RADIO INTO AN ELECTRICAL OUTLET IF YOU ARE UNSURE OF THE VOLTAGE.
Unwind the radio antenna (14) on the back of the clock radio. Extend and reposition the antenna for best
radio reception.
CLOCK and ALARM CLOCK OPERATION
Note: The time and alarm times can only be set when the radio is turned off.
SETTING THE TIME AND DAY
1. The digits will flash after connecting power, or press and hold down “TIME SET” button (3) for
approximately 3 seconds until the display flashes.
2. Press “HOUR/TUN-” button (8) repeatedly to change the hour setting.
3. Press “MIN/TUN+” button (11) repeatedly to change the minute setting.
4. Press “TIME SET” button (3) to confirm the time.
SETTING THE ALARM TIME
This clock radio has dual alarms that can be set and used concurrently. The procedure to set both alarms
are the same. Both alarms can either sound the buzzer or wake up to radio. Follow the instructions below
to set alarm time 1. For alarm time 2, substitute “AL1/VOL-” button (7) with “AL.2/VOL+” button (10)
1. Press “AL1/VOL-” button (7) to view alarm time 1. The digits will flash.
2. Press “HOUR/TUN-” button (8) repeatedly to change the hour setting.
3. Press “MIN/TUN+” button (11) repeatedly to change the minute setting.
4. Press “AL1/VOL-” button (7) once to confirm and digits will stop flashing.
(Note: This will turn on the alarm buzzer.)