8820IP Phone User Manual_ SIP (V1.44)
19
Fig 1.2 Network Setting
●
iptype
: Set how IP phone gets relevant network parameters by selecting
corresponding item from drop down list.
n
static ip
: Select this item to authorize users set IP address, subnet mask
and router IP address of IP phone manually.
n
dhcp
: Select this item to enable DHCP mode. With this system, your
LAN or router automatically assigns all the required network parameters
to any device connected to it when the device log on. PA168X IP phone
is shipped from the factory with DHCP on. So, if your LAN or router is
configured to use DHCP addressing, the IP phone’s LAN parameters
will automatically be configured as soon as it is connected to the LAN or
router and powered up.
n
pppoe
:
Those ADSL and Cable Modem users please select this item for
it is a protocol especially designed for them. With this system, ADSL
ISP automatically assigns all the required IP parameters to any device
connected to it when the device log on.
n
modem
:
If the IP phone used with modem, please select this item to get
relevant network parameters auto. Then please fill ID and pin into ppp id
and ppppin fields.