Stylus Pressure Gauge
Fitting Batteries:
When fitting the batteries in the Stylus Pressure Gauge, the positive symbol on both batteries should face
upwards when viewed from underside of the Stylus Pressure Gauge i.e. positive symbol on battery faces upwards and under the
opening.
Operation:
1. Place the Stylus Pressure Gauge on a firm surface.
2. Press ON/OFF switch, wait until (0.0) is displayed.
3. Place Stylus on scale.
4. Press the "M" button to shift the unit properties between Gram (g), Ounce (oz), Pennyweight (dwt) and Carat (ct).
Tare Weighing:
1. Turn on the Stylus Pressure Gauge as described above.
2. Place Stylus on scale.
3. Press "TARE" and wait until (0.0) is displayed.
4. Add the net weight item.
Caution
1. If the Stylus Pressure Gauge displays "OUTZ", please re-calibrate the Stylus Pressure Gauge as outlined in the manual.
2. Never load the Stylus Pressure Gauge past maximum capacity, overloading will permanently damage it.
3. Avoid any exposure to extreme heat or cold.
4. When switching the Stylus Pressure Gauge on, please allow 30 seconds for the meter to stabilise before calibration.
5. Please keep the Stylus Pressure Gauge in a clean environment, avoid dirt and moisture as this may cause an adverse effect on
reliability and accuracy.
6. Handle with care, gently place items on scale .
7. Avoid shaking, dropping or shocking the Stylus Pressure Gauge. This is a precision instrument and must be operated with
extreme care.
8. Only operate the Stylus Pressure Gauge on a stable, vibration free surface.
6
